Product center

Nonionic emulsion series

General

Non-ionic emulsion type polyacrylamide, in addition to retaining the advantages of traditional non-ionic dry powder polyacrylamide, has the characteristics of fast dissolution, easy transportation, storage and use. Compared with traditional products, it is suitable for a wide range of pH, relatively high molecular weight, good flocculation effect, and can be widely used in various domestic sewage, chemical wastewater, sludge dewatering treatment, paper making and other fields.

Specifications

Physical Form Milky, white liquid
Solid content(w/w) 30-35%
Molecule weight(104) 200-1200
Charge degrees(W/W) 0-10%
pH 6-8

Applications:

The emulsions polymer producted by our company has been successfully applied in liquid/solids separation systems, such as clarification, thickening, flotation and dewatering. The polymer is especially useful for the thickening and dewatering of biological sludges, such as waste activated, mixed primary/secondary, aerobic and anaerobically digested sludges etc.

Usage guidelines:

(1) We should shake as far as possible before using this product;
(2) The suggested dissolved concentration is 3-6 ‰ and the dissolved time is about 25 minutes;
(3) When conveying, avoiding use of the centrifugal pump, and we had better use low shear pumps like the screw pump, diaphragm pumps etc;
(4) We should dissolve the product in plastic, ceramic, and stainless steel tank, and the stirring speed should not be too big, no heating;
(5) Dilute solution prepared should not to be suitable for a long time placing , best along with uses along with to dissolve;

Storage and handling:

(1) Suggested in-plant storage life is six months in unopened containers;
(2) Totes, drums and pails should be mixed very well before first use and every few days thereafter;
(3) Bulk tanks are best mixed using a multi-blade agitator that reaches to within two feet of the bottom of the tank;
(4) Mixing bulk tanks by recirculation is also feasible in some circumstances;
(5) For best results, store between 50-80 °F (10-27 °C) and do not allow this product to freeze since there may be some loss of performance;
(6) Should freezing occur, allow the product to thaw thoroughly in a heated area, mix very well and filter through a 100 mesh screen before attempting to use.
(7) Rubber gloves, goggles and protective clothing are recommended for use while handling.
(8) Keep the handling field clean,preventing slippery

Technical service and maintenance:

Shanghai water treatment materials Co., LTD can provide comprehensive technical service in product selection, laboratory test, plant test etc. 

Packing:

Generally,1000KG plastic case, mixing fully before using.This product is not  the dangerous goods. Shelf life is 6 months. Shelf life is 6 months.

    Search by water treatment

  • Shanghai water treatment equipment
  • Shanghai Sewage Treatment Plant
  • Shanghai sewage treatment equipment
  • Shanghai integrated sewage treatment equipment

    Search by product

  • Polyacrylamide powder
  • Polyacryamide emulsion
  • Polyacrlamide liquid
  • Other chemicals

    Search by product application

  • Water treatment field
  • Paper industry
  • Mineral processing field
  • Oilfield field

    Search by water treatment equipment

  • Water treatment thickener
  • Water treatment coagulant
  • Water treatment flocculant
  • Cationic titration reagent